Search found 11 matches

by luvgm
Tue Aug 16, 2005 6:49 am
Forum: General
Topic: Engine Ever Act Like it's Running on 5 Cylinders??
Replies: 11
Views: 2417

How I tested mine (and got the **** shocked out of me because I did not use an insulated plug wire plyres) I pulled the plug wires off to each cylinder and sure enough the number one cylinder was not working. If you do it this way be very careful being shocked hurts. It is kind of an old school way ...
by luvgm
Tue Aug 16, 2005 6:36 am
Forum: General
Topic: Engine Ever Act Like it's Running on 5 Cylinders??
Replies: 11
Views: 2417

Mine did what you are talking and I found that it was the coil pack. They rarely go bad but it is something to check.
by luvgm
Wed Aug 10, 2005 7:22 am
Forum: General
Topic: T-Type wheels
Replies: 15
Views: 4492

Go to www.eastwood.com they have all kinds of automotive supplies, including wheel polishing and refinishing supplies.
by luvgm
Wed Jul 27, 2005 6:17 pm
Forum: General
Topic: Car running to lean? Possibly Mass Air Flow Sensor?
Replies: 37
Views: 9367

The injectors rarly go bad starting to throw money at a car when it is like this gets frustrating. If you are at your wits end take it to a mechanic one that you known is repeatable, they will start thowing parts at them two sometimes if they can not figure it out. If not try some of the following. ...
by luvgm
Sat Jul 23, 2005 4:32 pm
Forum: General
Topic: Dashpad Options
Replies: 17
Views: 8256

My dash on my lesabre was doing the same thing, so I cleaned up the foam and all of the plastic, under the dash so there was not any lose junk that would be between the vinyal and the hard plastic (i usaed rubbing alcohal for this). Then i took some time and put automotive silicone between the two (...
by luvgm
Thu Jul 14, 2005 8:09 am
Forum: General
Topic: Strut bar
Replies: 15
Views: 3319

I just got one off of ebay from a 1995 lesabe for my 1988 lesabre it bolted right on the car and the differance is amazing highly recommend :D .
by luvgm
Thu Jul 14, 2005 7:48 am
Forum: General
Topic: Bizarre radio problems.
Replies: 33
Views: 8420

there also is different ways that each deck picks up the reception from surrounding areas. I just went down to the cities(the twins) this weekend and got great reception from the pioneer deck in my 88 lesabre, was still getting 93.7 down in owatona. My pickup on the other hand has a clarion deck in ...
by luvgm
Wed Jun 29, 2005 6:33 pm
Forum: General
Topic: 4t?? informative
Replies: 11
Views: 5731

were would you get the gear sets? If these gears got changed to the lower gears it would make the car even more of a little rocket.
by luvgm
Wed Jun 29, 2005 3:37 pm
Forum: General
Topic: 4t?? informative
Replies: 11
Views: 5731

Is there any way to change the gears in these transmissions to say 323s?
by luvgm
Wed Jun 29, 2005 6:41 am
Forum: General
Topic: R12 to R134a Conversion
Replies: 8
Views: 2269

The reason that you would need to replace the drier is because you have a leak or your system would still be charged. This will cause the drier to accumulate excessive amounts of moiusture when you hook the new system up and do not replace this with the oil and the o-rings that need replaced it work...
by luvgm
Sat Jun 25, 2005 6:41 am
Forum: General
Topic: Front End Bra
Replies: 16
Views: 4147

plastic for the front of hood

I am new to the site but I am not new to cars. I worked in the auto body industery for many years. Do not work in the industery now because of medical problems. But when in the industry we used the plastic that T is talking about In many areas of the car (ex. Hoods, headlights, doglegs and any other...